CKD-600C Hydraulic Underground Core Drilling Rig
Major Components
Control Table
Feeding, rotation, reversing, rod lifting, clamp jaw tightening and releasing, winch winding and releasing all controlled through the handles on the control table.
Simple in operation but powerful in control.
Power Unit
The power unit is mounted on a wheeled frame independent to the drill body. It is composed of electric motors, hydraulic pumps, hydraulic cylinder, hydraulic oil tank, and electric control box.
Rotator
Hydraulic chuck with interchangeable jaws in the power head allows adaptation to different size rods. The spindle speed can be automatically adjusted by hydraulic motor.
Max. Torque 1,030Nm
Max. Rotation speed 1,145rpm
Feeding stroke 1,800mm
Max. Spindle dia. 97mm
Max. Pulling force 65Kn
Max. Feeding force 65Kn
Hydraulic System
Pressure 26MPa
Cooling Water cooled
Drill Mast
Length 3.3-5.8m
Drilling angle -90 degree~+90degree;
Dump length 1.1m
Hydraulic Rod Holder
The clamping action of the clamp jaws in the hydraulic rod holder is synchronized with the hydraulic chuck in the power head. The tightening of the clamp jaws is mechanically operated, while the releasing of the clamp jaws are hydraulic controlled. This ensures that when there is un-expected stoppage in the drilling operation, the drill rod can still be strongly held by the rod holder, so as to ensure the safety in the drilling operation.
Transportation Dimensions
Main frame 3,700x1,790x2,160mm
Power unit 2,980x1,210x1,560mm
Control table 785x680x950mm
Product Shows
Audited Supplier 
){kind=link}